Menu
500 Terry Francine Street,
San Francisco, CA 94158
info@mysite.com
123-456-7890

3 Phase Servo Controller Voltage Stabilizer (Air Cooled)


.jpeg)
.jpeg)

3 Phase Servo Controller Voltage Stabilizer (Oil Cooled)





1 Phase Servo Controller Voltage Stabilizer

.jpeg)
.jpeg)
.jpeg)

Constant Voltage Transformer (CVT)





Isolation Transformer
.jpeg)


.jpeg)

Make: Servo BPS Capacity: 50kva
Input Voltage Range: 340v to 470v Output voltage: 415v +/-1%
Input: MCCB Output: Contector and Changeover switch
Input voltage High/Low cutoff: Yes Overload cutoff: Yes
Input Phase Reversal working: Yes
Frequency: 47Hz-53Hz
Mode of Control: Fully Automatic
Last default Recording: Yes
Panel Control:LCD type Fully Automatic
Make: SERVO Capacity: 7.5kva
Input Voltage: 170v to 270v Output Voltage: 230v +/-1%
Input: MCB Output: Relay
PCB: Digital Frequency: 47Hz-53Hz
Ambient Temp: 0-55c Cooling: Natural Air
Correction Rate: 60v/sec Protection: Input High/Low Voltage
Overload Cutoff: Yes
KVA RANGE: 0.5 KVAv to 5 KVA
Input Voltage: 180v - 260v Output Voltage: 220 V/230V+2%
Output waveform: Sinusoidal
Waveform distortion: 5% to 7% (approximate under full load conditions)
Response: 40 milliseconds Load power factor: 0.7% lag to 0.90/01ead
Temperature: 50c
Principle of Operation: Ferro-resonan
Frequency: 50Hz + 1%
Effect of frequency: 1.6% change in output voltage for every 1% change in line frequency
KVA RANGE: 3 KVA to 1000 KVA
COOLING: AIR COOLED / OIL COOLED
INPUT VOLTAGE: 230v single phase / 400v three phase
OUTPUT VOLTAGE: 110v single phase/ 220v three phase
WINDING RATIO: 1 :1 ( OR as per customer's requirement)
CONNECTION: DELTA/ STAR, STAR / DELTA, DELTA/ DELTA, STAR/ STAR
INSULATION: CLASS F
NOISE ATTENUATION: 120 DB upto 10khz /70DB per range 10 khz to 50 khz
BREAKDOWN VOLTAGE: 2500v for 1 min
DC GALVANIC ISOLATION: > 100 mega —ohms Temp: 0 to 55
50kva 3phs Servo (Oil cooled)
Controller : 340v to 470v 3phs Output Voltage: 415v +/-1% 3phs
Input: MCB Output: Connector and Change over switch
Operation Frequency: 47Hz -53Hz
Correction Ratio: 70v/sec phs to phs 35 v/sce phs to oil
Panel control: LCD Display Mode of control: Automatic
Input High/Low voltage cutoff: Yes Over load cutoff: Yes
Oil failure cutoff: Yes Stabilizer Last default recording: Yes
Warranty: 24 Months